Product details description

The heavy hammer crusher is a new two-in-one crusher developed on the basis of the traditional crusher, The structure of the heavy hammer crusher is novel, consisting of a box, a rotor, a hammer head, a counterattack liner, a sieve plate, etc. The main working part of the heavy hammer crusher is the rotor with a hammer. The rotor consists of a spindle, a disc, a pin shaft and a hammer. The hammer crusher has a large feed particle size, one-time molding, cost savings, and wide range of uses.

Heavy hammer crushers are used to crush a variety of medium-hard and weakly abrasive materials. The compressive strength of the material does not exceed 100MPa, and the moisture content is less than 15%.

  How it works  

The motor drives the rotor to rotate at high speed in the crushing chamber, The material is fed into the machine from the upper feed port, It is crushed by the blow, impact, shear, and grinding effect of the high-speed moving hammer, In the lower part of the rotor, there is a sieve plate, a particle size smaller than the size of the sieve hole in the crushed material, Discharge through a sieve plate, Coarse-grained resistance larger than the size of the sieve hole remains on the sieve plate to continue to be hit and ground by the hammer, Finally, it is discharged from the machine through the sieve plate.

1. Low operating costs.

2. The heavy hammer crusher produced by our company adopts sophisticated accessories, especially the selection of wear-resistant parts, and the hammer head using chrome alloy is currently a domestic professional technology and wear-resistant metal parts.

3. Reduce wear and tear and extend service life.

■Specifications

INQUIRY DETAILS

Name:

E-mail:

mobile:

Message: